>> about us    >> contact us     >> make enquiry     >> legal stuff ph   +61 (0)2 9683 5006
> Thermally Conductive
    Interface Materials
   • Introduction
   • Sil-Pads
   • Gap Pads
        - Gap Filling Materials
        - FAQs
   • Adhesive Tapes / Bond Ply
   • TIC - Thermal Interface       Compounds
   • High-Flow Phase Change       Interface Materials
         - Products
         - Comparison Data
   • Sil-Pad Selection Guide
   • Sil-Pad Configurations
   • Applications
> Thermal Clad  
> Touch Screens  
> Anti-Static Products
    ACL Staticide
Thermally Conductive Insulators   >> Introduction

Thermally Conductive Insulators are designed to be clean, grease-free and flexible.
The combination of tough carrier material such as fibreglass and silicone rubber which is conformable,
provides the engineer with a more versatile material than mica or ceramics and grease.

Sil-Pads and Gap Pads minimise the thermal resistance from the case of a power semi-conductor to the heat sink. They electrically isolate the semi-conductor from the heat sink and have sufficient dielectric strength to withstand high voltage. They are also tough enough to resist puncture by the facing metal surface. With various materials available there is a Sil-Pad or Gap Pad matched to almost any application.

For more product information you can visit: www.bergquistcompany.com

  Phone: +61 (0)2 9683 5006  
  All © Copyright TJK Technologies
Web Site: b.b.advertising
About Us  I  Contact Us  I  Thermal Interface Materials  I  Thermal Clad  I  Touch Screens  I  ACL Staticide