>> about us    >> contact us     >> make enquiry     >> legal stuff ph   +61 (0)2 9683 5006
ACL Staticide
> Thermally Conductive
    Interface Materials
> Thermal Clad  
> Touch Screesn  
> Anti-Static Products
    ACL Staticide
   • Introduction
   • Static Dissipative Mats
   • Topical Anti-Stats
   • Topical Anti-Stats
      Clean Rooms
   • Mat and Table Top Cleaner
      and ESD Hand Lotion
   • Static Control and Cleaning
   • Cleaning Products
   • Static Dissipative
      Floor Finish Systems
   • Static Detection Meters
ACL Staticide   >> Static Dissipative Floor Finish Systems
ACL' Family of ESD Floor Finishes has a solution to your company's individual flooring needs. Each finish meets ESDA/ANSI 20.20 standard for static control. All finishes are non-toxic, biodegradable, have low V.O.C. and are RoHS compliant. Our finishes do not require buffing and provide superior performance when compared to other brands.

4300 STATICIDE ECO friendly
Effective and environmentally safe
For over twenty years, ACL's family of water-based static dissipative floor finishes has had low V.O.C. (volatile organic compounds) with little environmental impact. Advancing in this tradition, we developed an environmentally safe finish that is compliant to US and international policies concerning V.O.C. and restricted chemicals, while still satisfying ANSI 20.20 ESDA guidelines.

Designed to be used in electronic, medical, and clean room manufacturing facilities, Staticide® Eco-Friendly Floor Finish eliminates the concern of using products with phosphates, alkylphenol ethoxylates, carcinogens, and ozone-depleting compounds and delivers a polish that is non-toxic to humans, ecologically sound, and ESD safe.

Coverage is approximately 1500 – 2000 sq. ft. per gallon
V.O.C. is less than 1% when tested using California Consumer Product test   method CARB 310
Solids are 20%± 5%
Compliant to ANSI/ESD S20.20
Surface resistivity 107 – 109 ohms per square
Strip cycle is 12 - 24 months
Use on vinyl, linoleum, or ceramic tile

4600 STATICIDE Ultra
High quality, high performance, decreases stripping cycles!
No other ESD floor finish can match Staticide Ultra for electrical properties, physical longevity and gloss! Staticide Ultra utilises the latest technology in static dissipative polymers that axt on a molecular level. This enhances its static control ability, effectiveness and maximises the stripping cycles.
Long life saves money
Provides superior abrasion performance
Has an extended stripping cycle that can last for up to 24 months
Is easily maintained and repaired with no buffing
Dries faster and with higher gloss intensity than other ESD finishes
UL listed for slip resistance

Available In:
40001 (1 gallon bottle), 40005 (5 gallon pail), 40002 (54 gallon drum)

Coverage : 1500 - 2000 square feet per gallon (approx)

Specially formulated for unique industrial surfaces
Advanced acrylic polymer allows superior adhesion and static contro; for out-of-warranty ESD floors and other special surfaces. Does not yellow or flake and is tough to scuff. This long life floor finish will revitalise the shine and electrical properties of old ESD Tile.
Long life
Will adhere to ESD Tile
Enhanced abrasion performance
Easily maintained and repaired with no buffing

Available in :
4800-1 (1 gallon bottle), 4800-5 (5 gallon pail), 4800-2 (54 gallon drum)

Coverage : 1500 - 2000 square feet per gallon (approx)

4700 STATICIDE Diamond Polyurethane Static dissipative floor coating (ESD Paint)
This high performance water based formula dissipates static discharge on concrete and other unfinished hard floor surfaces.
Provides 100 % static control, even at low humidity
Withstands alcohol, oils, and other common electronic chemicals
Formulated with low V.O.C.s - less than 1.04 lbs/gallon
Resists yellowing, colour fading
Stocked in dark gray colour only

Available in : 4700-SS1 - 1 gallon bottle/4 per case; 4700-SS5 - 5 gallon bottle

5700 STATICIDE Premium ESD Paint
Economical Alternative to Epoxy or TileStaticide®
Premium ESD Paint is a high quality and economical alternative to ESD epoxy or ESD tile that will save in material and labor costs. Trouble-free to install and maintain, the rich viscosity of the paint allows for effortless mixing, application and even distribution of conductive ingredients.

The color palette allows for versatility in workplace aesthetics. The light colors can be used in designated work spaces or to reflect light for a brighter atmosphere. This paint is perfectly suited for electronics manufacturing, assembly, and ESD protected areas (EPAs).

• Designed for concrete floors
• Available in a variety of colors including light gray, blue, white, and beige
• Coverage approximately 300 sq. ft. per gallon
• ANSI/ESD S20.20 and RoHS compliant
• Surface resistivity is below 109 ohms per square
• Withstands alcohol, oil, gasoline and most common electronic   chemicals
• US customers can call 1-800-782-8420 for a sample

  Phone: +61 (0)2 9683 5006  
  All © Copyright TJK Technologies
Web Site: b.b.advertising
About Us  I  Contact Us  I  Thermal Interface Materials  I  Thermal Clad  I  Touch Screens  I  ACL Staticide